multi-pore hollow fiber

By HYNA-AQUA Membranes Co., Ltd. · 2012-02-29T08:13:36.000Z

multi-pore hollow fiber is a new product on HYNA-AQUA membranes company. Multi-pore hollow fiber have 7-pore in one hollow fiber, each hole ID is 0.9mm, the whole hollow fiber OD is 4.2mm. MWCO is 100,000 dalton, and the water flux is 230L/m2.hr, hollow fiber material can be PS,PP, PVC and PVDF.

About This Author

HYNA-AQUA Membranes Co., Ltd.

Guangzhou, Singapore

HYNA-AQUA Membrane Co. is an Ultra-filtration membrane manufacturer which was a high-technology company of membrane separation technique investigation, water treatment equipment manufacturing, sales and customer service. Our factory located in GuangDong Province . HYNA-AQUA provides high antipolluti…

More Articles From This Author

MBR module

2012-02-29HYNA-AQUA provides different MWCO module product, such as standard UF membrane module, MBR module, special module for electrophoretic paint and HN-LUF high antipollution series. Our MBR module have 4 models, we also provide the custom made … Read More »

UF module

2012-02-29HYNA-AQUA except build the different water flux water treatment. Also provide UF module and MBR module. HYNA-AQUA provides different MWCO module product, such as standard UF membrane module, MBR module, special module for electrophoretic pa… Read More »

MBR system

2012-02-29HYNA-AQUA according each customers information and request to make diffrerent water flux MBR system. Also provide all the engineer support and module replace. our MBR system can be as industrial waste water recycling system, dyeing and prin… Read More »

UF system

2012-02-29HYNA-AQUA according each customers information and request to make diffrerent water flux UF system. Also provide all the engineer support and module replace. our UF system can be as potable water purification system, Ro system pre-purificat… Read More »